Do you know what the installation method of the sealing strip is? Wholesale Revolving door seal price Xiaobian will take you to a brief understanding.
1. Glass gasket and groove sealing strip: After the window and the window are cleaned by electric welding, the sealing strip should be pushed into the slot hole of the aluminum profile with a small amount of force with a special roller according to the proper surface and direction, and at the same time Press the top of the sealing strip to diastolic and put it into the slot hole of the aluminum profile. Because the sealing strip is an elastomer material, it is likely to shrink after rolling. The appropriate method is: when the sealing strip is installed at the connection between the two sides, shrink the two sides of the sealing strip to the middle, and leave 2- 3 cm of folding capacity, then break it and place it in the slot.

2. Laminated glass decorative strip: Manually insert the sealing strip into the aluminum profile groove according to the appropriate surface, and then press the outer surface of the sealing strip firmly to press the sealing strip into the gap between the laminated glass and the aluminum profile. The sealing strips on both sides are shrunk a little to the middle, and after vacating the size of 1-2 cm, break it, and press it into the slot hole.
The above is the introduction of Wholesale Revolving door seal price: the installation knowledge of the seal.