The customized Car door glass weatherstrip price is a type of seal that is mainly used for building decorative doors and windows such as plastic steel doors and windows, aluminum alloy doors and windows, and wooden doors and windows. So how much do you know about its use precautions? Let’s take a look at it with the editor below!
1. The installation of the glass is not centered, the gap between the glass and the window frame is uneven, the rubber sealing strip is not close to the glass and the window frame, and the installation is uneven. Knock the glass with your hand, there is a loose sound. The reasons for this situation:
1. The sundries in the notch are not removed in time when the glass is installed, so that the glass is not aligned with the notch.
2. The gap between the glass and the glass notch is uneven, and the rubber strip is in poor contact with the glass and the glass groove, protruding from the glass notch, and the sealing strip can be easily pulled off by hand.
3. The rubber strip is not broken at the corners, and glue is not glued.

2. The rectification measures are:
1. Before installing the glass, carefully remove the sundries in the notch, such as mortar, brick chips, wood blocks, etc., carefully align the glass when placing it, ensure that the gap on both sides is even, and correct and fix it in time to prevent collision, displacement, and deviation. Center of notch.
2. The rubber sealing strip cannot be pulled too tightly, and the blanking length is 20-30mm longer than the assembly length. The mounting should be in place during installation, the surface should be straight, and it should be in close contact with the glass and the glass notch, so that the force around the glass is even. At the corners, the rubber strips should be cut off with a bevel, and glue should be injected at the break to be firmly bonded.
3. When sealing the glass with sealant, you should squeeze the glass with a rubber strip or a rubber block to leave a gap for the glue. The depth of the glue should not be less than 5mm. Before the glue is cured, the glass should be kept from vibration.
The above is a brief introduction to the precautions related to the customized Car door glass weatherstrip price.