The customized Sponge sealing strip profile is a sponge sealing product. The density is small, and it has excellent sealing performance, cushioning performance and elasticity. So how much do you know about the precautions for the use of sealing strips? Let's take a look at it briefly!
1. The sundries in the notch are not eradicated in time when the equipment is glass, so that the glass is not aligned with the notch.
2. The gap between the glass and the glass notch is uneven, and the rubber strip is in poor contact with the glass and the glass groove, protruding from the glass notch, and the sealing strip can be easily pulled off by hand.

3. The rubber strip is not broken at the corners, and glue is not glued. The rectification method is: carefully eradicate the sundries in the notch, such as mortar, brick chips, wood blocks, etc., before the equipment glass, carefully align the glass when placing it, ensure that the gap between the two sides is even, and correct and fix it in time to avoid bumping and displacement. , Contrary to the notch base. The rubber sealing strip cannot be pulled too tightly, and the length of the blanking is 20-30m longer than the length of the equipment. The equipment should be inlaid in place, the surface should be straight, and it should be in close contact with the glass and the glass notch, so that the force around the glass is even. At the corners, the rubber strips should be cut off at an inclined plane, and glue should be injected at the break to be strong. When sealing the glass with sealant, you should squeeze the glass with a rubber strip or block first to leave a space for glue injection. The depth of glue injection should not be less than 5mm. Before the glue is cured, the glass should be kept free from vibration.
The above is an introduction to the precautions for the use of the customized Sponge sealing strip profile.